Results 1 to 4 of 4

Thread: Correct Cable/s Application

  1. Correct Cable/s Application

    On my XA, can anyone tell me what application I should be looking up for the Brake, Clutch and Throttle cables??
    Thnx in advance...
    sambo42xa
    Southern, NH-USA
    ....all comments/suggestions/opinions are Mine only and are not meant to offend anyone; it's called "busting balls" or "having fun", so get over it!

    1988 Sportster 883
    2005 FLHTCI
    1942 XA (under construction)
    38+ Old Bicycles

  2. Re: Correct Cable/s Application

    Maybe I'm posting in the incorrect area?
    sambo42xa
    Southern, NH-USA
    ....all comments/suggestions/opinions are Mine only and are not meant to offend anyone; it's called "busting balls" or "having fun", so get over it!

    1988 Sportster 883
    2005 FLHTCI
    1942 XA (under construction)
    38+ Old Bicycles

  3. #3

    Re: Correct Cable/s Application

    Sambo42xa,
    XA cables are somewhat unique, however try talking to Old Dude, Dennis Corso, or perhaps Tom Faber. Most of the cables out there are pre-sized for common models like Knuckles and 45s, but the housings and inners are the same, you just need them the right length for an XA. I'll compare numbers in the XA and standard books later.
    Robbie
    Well I just looked in the XA parts book and the front brake and throttle are the same as all other models, only the clutch is unique. Should be easy to source.
    Last edited by Rubone; 04-24-2012 at 08:11 PM.

  4. Re: Correct Cable/s Application

    Thnx for taking the time to look up the info. for me. It helped very much.
    sambo42xa
    Southern, NH-USA
    ....all comments/suggestions/opinions are Mine only and are not meant to offend anyone; it's called "busting balls" or "having fun", so get over it!

    1988 Sportster 883
    2005 FLHTCI
    1942 XA (under construction)
    38+ Old Bicycles

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. part application help needed
    By flat-happy in forum General Maintenance & Tech Tips
    Replies: 3
    Last Post: 09-21-2011, 12:47 AM
  2. Gas Cap Identification and Application
    By panz4ever in forum General Motorcycle Discussion
    Replies: 9
    Last Post: 01-27-2011, 07:34 PM
  3. Application testing tool needed
    By MartinWann in forum General Maintenance & Tech Tips
    Replies: 6
    Last Post: 03-23-2010, 08:54 PM
  4. cable luber
    By flathead in forum Motorcycle Tools, Clothes & Gear
    Replies: 5
    Last Post: 12-16-2007, 08:46 PM
  5. Odd Bicycle - Motorcycle Application?
    By Buzz_Kanter in forum Off Topic
    Replies: 2
    Last Post: 12-13-2007, 06:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •